您的位置: 旅游网 > 生活

如何在Linux下驱动Conexant USB ADSL (3)

发布时间:2019-12-04 07:59:01

2.3设置协议

编辑/etc/cxacru文件,像这个样子:

代码:

#

# Config file for Conexant AccessRunner

#

# Driver mode

DRIVER_MODE=1 # 1 = normal, 2 = debug, 3 = normal+max speed (without ask adsl status),4 = debug+max speed (without ask adsl status)

# Protocol

PROTOCOL_MODE=4 # 1 = RFC1483/2684 routed, 2 = PPP over ATM (pppoa), 3 = RFC1483/2684 bridged, 4 = PPP over Ethernet (pppoe)

# Paths

BINARY_PATH="/usr/sbin"

ATM_PATH=""

# ADSL

# if OPEN_MODE is blank then cxload uses default mode acoording VID & PID

# Values for OPEN_MODE are:

# 0 = auto selection, G.Handshake

# 1 = auto selection, T1.413

# 2 = G.Handshake

# 3 = ANSI T1.413

# 4 = ITU-T G.992.1 (G.DMT)

# 5 = ITU-T G.992.2 (G.LITE)

OPEN_MODE=4

# ATM

VPI=0

VCI=33

# Specific for RFC1483/2684 routed/bridged

# if IP_ADDRESS is blank in bridged mode then it uses DHCP to get IP

IP_ADDRESS=

NETMASK=255.255.255.255

GATEWAY=

需要更改的是# Protocol # ADSL # ATM

如果你用的是RFC1483/2684协议还要设置# Specific for RFC1483/2684 routed/bridged

PPPOE和PPPOA的用户只要修改# Protocol # ADSL # ATM 这3项就可以了

3.拨号

在终端下输入cxstart.sh建立连接 cxstop.sh断掉连接

用ifconfig检查一下你是否已经连上了,像这个样子:

代码:

[root@Love root]# ifconfig

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

nas0 Link encap:Ethernet HWaddr 00:00:01:00:00:00

inet6 addr: fe80::200:1ff:fe00:0/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:17650 errors:0 dropped:0 overruns:0 frame:0

TX packets:15790 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:15856545 (15.1 Mb) TX bytes:2128934 (2.0 Mb)

ppp0 Link encap:Point-to-Point Protocol

inet addr:221.214.196.80 P-t-P:221.0.64.38 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1

RX packets:16454 errors:0 dropped:0 overruns:0 frame:0

TX packets:14588 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:15674609 (14.9 Mb) TX bytes:1613794 (1.5 Mb)

[root@Love root]#

如果有nas0和ppp0那么恭喜你你已经成功了!

优植口腔医院
郑州华柱白癜风医院预约挂号
泉州治疗宫颈炎费用
安徽哪家医院治疗癫痫病较好
徐州治疗男科医院哪家好
猜你会喜欢的
猜你会喜欢的